Panel Solar DC and AC Smart PV Hot Water Heater 80L 100L for Bathroom

• Customization: Available
• After-sales Service: Prompt Afer Sales Servic
• Warranty: 1year
• Model NO.: PV Hot Water Heater 80L 100L
• Max. Capacity: >200L
• Structure: Separate Type
• Pressure: PV Panel
• Interior Material: Stainless Steel
• Collector Components: Heating Tube
• Composition: Collector
• Certification: CE, CB
• The Tank Capacity (L): 50-300
• The Tank Material: Enamel
• PV Peak Voltage (Vpmax): DC( 1-150V)
• PV Open Circuit Voltage (Vop): 84V-126V
• PV Peak Power (W): 500-2000W
• Transport Package: Carton Box
• Specification: 50L 100L 150L 200L 300L
• Trademark: Solargreen
• Origin: Zhejiang
• HS Code: 84191990
• Production Capacity: 5000PCS Per Month
• Package Size: 195.00cm * 31.00cm * 135.00cm
• Package Gross Weight: 20.000kg

Product Description

Panel Solar DC and AC Smart PV Hot Water Heater 80L 100L for Bathroom


Solar water heater features:
(1) Large screen temperature indication with heating indicator light, working status at a glance.
(2) Microcomputer control, heating and insulation automatic control.
(3) The inner liner is made of high-quality steel plate and equipped with a liner protection device, which is anti-corrosion and pressure-resistant and durable.
(4) It has multiple safety protection functions such as leakage protection, anti-dry protection, over- temperature protection, over-pressure protection, and leakage warning.
(5) The insulation layer is foamed with thickened polyurethane, which has good heat preservation effect and saves energy.
(6) It has a wide range of water pressure and large capacity, and can be used for water at the same time.

Solar water heater specification:

Type	GF-50LII(PV)(DC Only)	GF-60LII(PV)(DC Only)	GF-80LII(PV)(DC Only)	GF-50L(PV)(ACDC)	GF-60L(PV)(ACDC)	GF-80L(PV)(ACDC)	GF-100L(PV)(ACDC)	GF-200L(PV)(ACDC)
The tank capacity (L)	50	60	80	50	60	80	100	200
The tank material	enamel	enamel	enamel	enamel	enamel	enamel	enamel	enamel
PV peak voltage (Vpmax)	DC( 1-150V)	DC( 1-150V)	DC( 1-150V)	DC( 1-150V)	DC( 1-150V)	DC( 1-150V)	DC( 1-150V)	DC( 1-150V)*2
PV open circuit voltage (Vop)	84	84	126	84	84	126	126	126*2
PV peak power (W)	500w or above	500w or above	800w or above	500w or above	500w or above	800w or above	800w or above	2000w or above
Grid Power (V)				220-240V	220-240V	220-240V	220-240V	220-240V
Power frequency (Hz)				50	50	50	50	50
Rated power consumption W/H				2000	2000	2000	2000	2000*2
(MPa)Nominal pressure (Mpa)	0.8	0.8	0.8	0.8	0.8	0.8	0.8	0.8
AC.Temperature range (ºC)				30--75	30--75	30--75	30--75	30--75
DC.Temperature range (ºC)	≥75ºCOFF/≤65ºCON
The extermal diameter (mm)	390	390	470	390	390	470	470	520
Outer barrel length(mm)	695	900	780	785	900	780	915	1520
Insulation thickness (mm)	25	25	25	35	35	35	35	25
Insulation density (Kg/m³)	34	34	34	34	34	34	34	34
Insulation material	Environmentally friendly polyurethane
24hε) Natural energy consumption coefficient (ε)	0.7	0.7	0.7	0.58	0.58	0.58	0.58	0.7
Energy consumption  level	Super grade2	Super grade 2	Super grade 2	Super grade 1	Super grade 1	Super grade 1	Super grade 1	Super grade 2
Hot water output(μ)	80.00%	80.00%	80.00%	80.00%	80.00%	80.00%	80.00%	80.00%
Energy efficiency	Super grade2	Super grade2	Super grade2	Super grade 1	Super grade 1	Super grade 1	Super grade 1	Super grade 1

Product Details:


Special warning:
1. This electric water heater must have a safe and reliable grounding device.
2. This machine must be installed with a safety valve at the water inlet.
3, must be filled with water before powering up, when adding water should open the water inlet and outlet simultaneously,after fill up the water,it will flow out from the water outlet.
4. The water inlet and outlet of the water heater cannot be closed at the sametime.
5. It should be cleaned once for half a year.
Method: first close the tap water valve, then unscrew the drain port (be careful to avoid hot water) and then open the water outlet valve, the water in the machine will flow out from the drain outlet. After emptying, open the tap water valve and rinse it several times until the water that flows out is free of impurities.

Daily mainternance:

1, Always pay attention to the pipe joints with or without water leakage, if any, timely treatment.

2. Regularly (one week) check whether the leakage test plug of the leakage protection plug power cord  "test power off " button can be operated.

3. Always observe whether the safety valve can be properly relieved.

4.  Always  check  if  the  grounding  of  the   power  socket  is  firm  and  meet  the   power  supply requirements.

5, Rigorous wethand plugged in the power plug, the power plug should be unplugged when not in use for a long time.

6. Due to the different water quality and hardness of different areas, the water heater should be drained regularly to discharge the sediment at the bottom of the tank. To empty the water heater, first close the tap water valve, then unscrew the drain port (be careful to avoid hot water), then open the water outlet valve, the water in the machine will flow out from the drain outlet. After emptying, open the tap water valve and rinse it several times until the water that flows out is free of impurities.

7. The safety valve should not be replaced at will. Only the original parts can be used. The pressure of the safety valve should not be adjusted by itself. At least once a month, the safety valve handle is swayed (unscrew the fixing screw before shaking) to see if there is water Discharge, if it can not be discharged, notify the manufacturer or the manufacturer of the service point to repair.


Common fault and approach:
 

Fault phenomenon	Cause Analysis	Approach
Water   discharging is cold water (The work indicator is off)	1. The  reset  button on the  plug or the power switch is not pressed 2. Power fuse off or air switch jump or leakage protection switch action 3. Power supply line blackout 4. Poor contact in the power outlet   5.  The  lowest  temperature  control state of the thermostat 6.     Thermostat,     thermal     circuit breaker is bad	1. Press thereset button or power switch 2. Replace the fuse (close the air switch), reset the leakage protection switch 3. Power supply to be powered 4. Replace the power outlet 5.  Adjust  the  thermostat  to  the  "high temperature" file 6.   Replace   the   thermostat,   thermal circuit breaker
Water is cold water (The work indicator is on)	1. Heating time is not enough 2. Electric heating tube burned out 3. Mixing valve failure The   patch  cord  is  loose  and  the contact is poor.	Waiting for heating 2. Replace the electric heating tube 3. Replace the mixing valve Replacement connector
Hot   water   outlet does   not   produce water	1. Tap water to stop water 2. The water pressure is too low 3. The tap  water  inlet  valve  is  not open 4. Mixing valve failure Inlet and outlet pipe failure	1. Waiting for tap water supply 2. Re-use when the water pressure rises 3. Open the inlet valve 4. Replace the mixing valve 5. Check the replacement of the inlet and outlet pipe
Remaining   current protector         reset button   cannot   be reset	Leakage 2. Plug damage	1. Check for leakage faults: power cord, internal   connection    line,   thermostat, over-temperature     protector,     electric heating tube, etc. 2. Replace the plug or professional repair
Warning light on	1. Ground wire is charged 2. Machine leakage	Stop  using,  notify  the   professional  to repair
Fault code table	E2 dry burning protection E3 temperature sensor failure E4 over temperature protection	Power off after adding water Replace the temperature sensor Replace the board

More hot items: